An Ion-Exchangeable MOF with Reversible Dehydration and Dynamic Structural Behavior (NH4)2[Zn2(O3PCH2CH2COO)2]⋅5 H2O (BIRM-1)

(NH₄)₂[Zn₂(O₃PCH₂CH₂COO)₂]⋅5 H₂O (BIRM-1) is a new metal phosphonate material, synthesized through a simple hydrothermal reaction between zinc nitrate and 3-phosphonopropionic acid, using urea and tetraethylammonium bromide as the reaction medium. In common with other metal–organic framework materials, BIRM-1 has a large three-dimensional porous structure providing potential access to a high internal surface area. Unlike most others, it has the advantage of containing ammonium cations within the pores and has the ability to undergo cation exchange. Additionally, BIRM-1 also exhibits a reversible dehydration behavior involving an amorphization-recrystallization cycle. The ability to undergo ion exchange and dynamic structural behavior are of interest in their own right, but also increase the range of potential applications for this material. Here the crystal structure of this new metal phosphonate and its ion exchange behavior with K⁺ as an exemplar are studied in detail, and its unusual structure-reviving property reported.     

Controlling the stability and the electronic structure of transition metal dichalcogenide single layer under chemical doping

By means of ab initio calculation based on density-functional theory (DFT), we have investigated the electronic and optical properties of single layer MoSe₂ under chemical doping by various groups, such as ?H, ?OH, ?NH₂ and ?CH₃. This work is generalized for all polymorph 1H, 1T, 1T′ and the new investigated phase 1T″. We found that all those functional groups (FG) bonded covalently to the chalcogen atom (Se). The evaluation of adsorption energy shows that the hydrogen atom binds more strongly than other functional groups in particular with the T phase. Furthermore, the attachment of functional groups to T-MoSe₂ leads to dramatic changes to the structure stability and the optoelectronic properties of the material by tuning its band gap from metallic to a semiconductor. Also, we found that the band gap is strongly depending on the type and the densities of dopants.     

Effects of graded porous structure on local strain distribution under compression in silicone rubber

Silicone rubber samples with gradually changing pore sizes within the range of 70–610 μm are produced using an improved spacer method. The samples are scanned using an X‐ray computed tomography to evaluate their graded structure as compared to uniform rubber. A compressive test reveals that graded porous silicone rubber has characteristic stress–strain curves whose slope changes within a specific strain range depending on the porous structure. Analysis results of local strain based on a digital image correlation of the graded porous silicone rubber under compression demonstrate that the characteristic stress–strain properties are caused by shifts in the main deformation region in the graded structure. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1033–1042     

二维CdO的低晶格热导率研究

寻求具有较小晶格热导率k_lat的高热电性能的二维材料具有重要意义。基于从头计算和声子玻耳兹曼输运理论,该研究首先对二维CdO结构进行优化,并通过计算声子谱验证了单层CdO的动力学稳定性。在此基础上详细研究了单层CdO的声子输运性质。计算表明在室温下单层CdO的晶格热导率k_lat约为5.7 W/(m·K),低于单层石墨烯、磷烯、黑磷和MoS₂等二维材料的晶格热导率。其中,Z方向声学模式(Z-direction acoustic, ZA),横声学支(transverse acoustic,TA),纵声学支(longitudinal acoustic, LA),Z方向光学模式(Z-direction optical, ZO),横光学支(transverse optical, TO),纵光学支(longitudinal optical, LO)对k_lat的百分比贡献分别为73.7％、13.9％、3.7％、2.8％、4.7％和1.2％。研究发现,ZA、TA、LA声学支和光学支之间的强散射是导致单层CdO低热导率的原因。本文计算结果可用于指导基于CdO的低维热电器件的设计。     

无溶剂热处理固相转化法简易制备沸石咪唑酯骨架材料

设计开发了一种无需溶剂，通过热处理固相转化制备沸石咪唑酯骨架材料（ZIFs）的简易方法.该方法无需溶剂及其它预处理，只需将金属源与有机配体固相混合后于低温（200℃）热处理即可实现多孔晶体材料的制备.所合成材料H-ZIF-67为具有方纳石拓扑结构的纳米晶体，与传统方式合成的ZIFs材料一致.粉末X射线衍射（PXRD）分析结果表明产物的晶体结构与标准ZIFs谱图一致.通过扫描电子显微镜（SEM）、透射电子显微镜（TEM）、N₂吸附-脱附分析、热重分析（TGA）和傅里叶变换红外光谱（FTIR）等手段对合成的材料进行了表征，发现H-ZIF-67材料具有与ZIFs材料类似的特性.该方法经济、高效，摒弃了传统方法合成ZIFs材料周期长、处理过程复杂的弊端，为ZIFs材料的量产提供了新思路.     

磁光平面波导的单向传播特性

表面磁等离子体(surfacemagnetoplasmons,SMPs)是一种在电介质和偏置磁场作用下磁光材料界面处传播的近场电磁波.其独特的非互易传播特性引起了大量科研工作的关注,但在具体的波导结构设计上仍存在很多问题.本文研究了一种银-硅-磁光材料的3层平面波导结构,SMPs在磁光材料和硅的界面处传播,发现在特定的频率范围内,SMPs的基模及高阶模式均具有正向或反向的单向传播特性.分别计算了旋磁与旋电材料平面波导的色散方程,研究了硅层厚度与外加磁场对能带结构及SMPs单向传播区域的影响,发现无论是旋磁或旋电材料的结构,硅层厚度的增加使高阶模式使高阶模式出现在更低的频率位置,使单向传输带宽变小甚至消失,外加磁场的变大使磁光材料的能带结构频率增大的同时带隙中也引入了高阶模式.计算了2种磁光材料平面波导的正向和反向的单向传播带宽宽度,发现旋磁材料YIG的单向SMPs模式出现在GHz波段,最大单向带宽可达到2.45 GHz;旋电材料InSb的单向SMPs模式出现在THz波段,最大单向带宽达到3.9 THz.     

以磷化铁为添加剂沿(111)面生长磷掺杂金刚石大单晶

掺杂是调控金刚石性能的一种重要手段。本文采用温度梯度法,在5.6 GPa、1 312 ℃的条件下,选用Fe₃P作为磷源进行磷掺杂金刚石大单晶的合成。金刚石样品的显微光学照片表明,随着Fe₃P添加比例的增加,金刚石晶体的颜色逐渐变深,包裹体数量逐渐增加,晶形由板状转变为塔状直至骸晶。金刚石晶形的变化表明Fe₃P的添加使生长金刚石的V形区向右偏移,这是Fe₃P改变触媒特性的缘故。红外光谱分析表明,Fe₃P的添加使金刚石晶体中氮含量上升,这说明磷的进入诱使氮原子更容易进入金刚石晶格中。激光拉曼光谱测试表明,随着Fe₃P添加比例的增加,所合成的掺磷金刚石的拉曼峰位变化不大,其半峰全宽(FWHM)值变大,这说明磷的进入使得金刚石晶格畸变增加。XPS测试结果显示,随着Fe₃P添加比例的增加,金刚石晶体中磷相对碳的原子百分含量也会增加,这意味着添加Fe₃P所合成的金刚石晶体中有磷存在。     

三维网络结构NiCo2S4@NiCo2O4复合电极的制备及其性能

超级电容器具有更大的功率密度、优秀的循环稳定性、极快的充放电速度、超长的循环寿命以及环境友好等突出特点,其性能与构件关系密切,其中最根本的就是组成它的电极材料。本研究主要采用传统的水热法制备出钴酸镍(NiCo₂O₄)电极材料,进而通过离子交换(二次水热)制得镍钴硫(NiCo₂S₄),最后利用化学浴沉积(CBD)法使其与钴酸镍复合,得到最终所需的三维网络结构NiCo₂S₄@NiCo₂O₄复合电极。经过表面形貌表征、循环伏安测试、恒电流充放电测试以及比电容计算分析等可以证明:三维网络结构NiCo₂S₄@NiCo₂O₄复合电极的比电容及循环稳定性等远远优于复合前单一的纯NiCo₂O₄电极材料,具有极大应用前景。